DANOSA ESTERDAN PLUS 50/GP ELAST - Black Mineral - 8m x 1m

• SBS elastomeric formulation ensures high elasticity and ageing resistance
• Mineral finish provides UV protection and mechanical durability
• Excellent resistance to tearing, static and dynamic piercing
• High tensile strength and elongation at break
• Rot-proof and dimensionally stable over the long term
• Adaptable to complex geometries and Safe2Torch detailing
• Suitable for exposed roof applications with pedestrian traffic

• Waterproofing under tiles on pitched roofs, providing mechanical strength and enhanced protection due to the mineral finish.
• Capsheet in multi-layer roof waterproofing systems with mineral self-protection.
• Capsheet in single-layer waterproofing systems where exposed durability is required.
• Not suitable as a cap sheet on green roofs – use the GARDEN variant.
• Avoid water retention on exposed self-protected roofs to prevent sediment accumulation and potential membrane damage.
• Pay careful attention to detailing at parapets, drains, expansion joints, and other singular points.
• On metallic or slightly porous surfaces, apply a bituminous primer (IMPRIDAN 100) prior to bonding.
• Verify compatibility with thermal insulation and consider a geotextile separating layer if expansion could affect the membrane.
• Polyurethane foam must not be sprayed directly onto the waterproofing without a protective separating layer.
• In refurbishment, ensure chemical compatibility with existing waterproofing systems such as PVC membranes or tar-based mastics.
• Lighter-coloured mineral finishes improve thermal performance, while coloured granules may vary between production batches and darken over time.

What is ESTERDAN PLUS 50/GP ELAST. used for?

It is designed as a capping sheet for pitched and flat roofs, used in both single-layer and multi-layer waterproofing systems.

Can it be used on green roofs?

No, this version is not suitable for green roofs. The GARDEN variant should be used instead.

What makes the mineral finish beneficial?

The mineral finish protects the membrane from UV exposure, adds mechanical resistance, and improves handling and safety during installation.