DANOSA M.A.D 6 Bituminous Membrane - 4.5m x 1m

• 6mm thick high-density bitumen acoustic membrane
• Designed for low-frequency sound insulation
• Acts as an anti-resonant layer to improve system performance
• Increases mass of lightweight walls for higher acoustic protection
• Reduces cavity size requirements by improving low-frequency insulation
• Converts acoustic energy into dynamic energy between insulation layers
• Easy installation via stapling or self-adhesive application
• Enhances the acoustic performance of galvanised steel sheets

• Industrial insulation: Provides acoustic mass and anti-resonance properties when applied to galvanised steel sheets.
• Partition walls: Improves low-frequency sound insulation when placed between rigid elements such as gypsum plasterboard.
• Ceiling and wall systems with spring elements: Increases the isolation performance of suspended ceilings and floating wall constructions.
  
  Installation Guidance
  
• Always refer to relevant Danosa SPD guidelines for correct installation procedures.
• Ensure partition walls are plastered with at least 1 cm thickness and not anchored directly to structural elements, except at the roof where necessary.
• Anchor ceiling dampers to floor joists or reinforced construction elements to ensure stability.
• For heavy ceilings, use a grid system with primary and secondary profiles to distribute load and protect against failure at shock absorber points.
• Anchor gypsum plasterboards to galvanised steel auxiliary structures, avoiding direct plate-to-plate screws.
• In dry wall cladding over 4m high, use elastic fasteners for added stability.
• When adhering to galvanised steel sheets, follow manufacturer’s bonding guidance to maximise anti-resonance performance.

How does Danosa M.A.D 6 work?

Danosa M.A.D 6 works by absorbing and decoupling sound vibrations, preventing noise from traveling through the floor structure. This helps reduce both impact noise (like footsteps) and airborne sound (like conversations or music) from penetrating between rooms or floors.

Does Danosa M.A.D 6 work with underfloor heating?

Yes, Danosa M.A.D 6 is compatible with underfloor heating systems, but care should be taken to ensure the heating system is installed correctly to avoid any performance issues.

Is Danosa M.A.D 6 moisture resistant?

Yes, it is moisture-resistant, making it suitable for use in areas where humidity might be present, such as kitchens or bathrooms, provided it is installed according to the manufacturer's guidelines.